S. 3674 2
934. License issuance and renewal.
935. Practice by license holder.
936. Licensee duties; prohibited activities.
937. Civil penalties and revocation.
938. Denial of license; complaints; notice of hearing.
939. Judicial review.
940. Rulemaking authority.
S 930. Definitions. As used in this article: 1. "Department" means the
department of labor.
2. "Mold" means ANY indoor [mold] MULTI-CELLULAR FUNGI growth capable
of creating toxins that can cause pulmonary, respiratory, neurological
or other major illnesses after minimal exposure, as such exposure is
defined by the environmental protection agency, centers for disease
control and prevention, national institute of health, or other federal,
state, or local agency organized to study and/or protect human health.
3. "Mold remediation" means conducting the business of removal, clean-
ing, sanitizing, or surface disinfection of mold, mold containment, and
waste handling of mold and materials used to remove mold from surfaces
by a business enterprise, including but not limited to, sole proprietor-
ships. Mold remediation for the purposes of this article shall not
include remediation of the underlying sources of moisture that may be
the cause of mold that requires expertise not specific to acts author-
ized under this article.
4. "Mold assessment" means an inspection or assessment of real proper-
ty that is designed to discover [indoor] mold [growth, toxic mold
growth], conditions that facilitate [indoor] mold [growth and/or], indi-
cia of conditions that are likely to facilitate [indoor] mold [growth],
OR ANY COMBINATION THEREOF.
5. "Mold abatement" means the act of removal, cleaning, sanitizing, or
surface disinfection of mold, mold containment, and waste handling of
mold and materials used to remove mold from surfaces by an individual.
6. "PROJECT" MEANS MOLD REMEDIATION, MOLD ASSESSMENT, OR MOLD ABATE-
MENT, OF AREAS GREATER THAN TEN SQUARE FEET, BUT DOES NOT INCLUDE (A)
ROUTINE CLEANING OR (B) CONSTRUCTION, MAINTENANCE, REPAIR OR DEMOLITION
OF BUILDINGS, STRUCTURES OR FIXTURES UNDERTAKEN FOR PURPOSES OTHER THAN
MOLD REMEDIATION OR ABATEMENT.
7. "Commissioner" means the commissioner of the department of labor.
S 931. Licensing requirements. 1. It shall be unlawful for any
contractor to engage in mold assessment ON A PROJECT, or to advertise or
hold themselves out as a mold assessment contractor unless such contrac-
tor has a valid mold assessment license issued by the commissioner.
2. It shall be unlawful for any contractor to engage in mold remedi-
ation ON A PROJECT, or to advertise or hold themselves out as a mold
remediation contractor unless such contractor has a valid mold remedi-
ation license issued by the commissioner.
3. It shall be unlawful for any individual to engage in mold abatement
ON A PROJECT or to advertise or hold themselves out as a mold abatement
worker unless such individual has a valid mold abater's license issued
by the commissioner.
4. A copy of a valid mold assessment or mold remediation license must
be conspicuously displayed at the work site on a mold project.
5. (a) Nothing in this article shall prohibit any design professional
licensed pursuant to title eight of the education law from performing
mold inspection, assessment, remediation and/or abatement tasks or func-
tions if the person is acting within the scope of his or her practice,
or require the design professional to obtain a license under this arti-
S. 3674 3
cle for such mold inspection, assessment remediation and/or abatement
tasks or functions.
(b) Nothing in this article shall mean that any individual not
licensed pursuant to title eight of the education law may perform tasks
or functions limited to the scope of practice of a design professional
under such title.
S 932. License; procedure. 1. The commissioner shall establish minimum
qualifications for licensing.
2. Applications for licenses and renewal licenses shall be submitted
to the [department] COMMISSIONER in writing on forms furnished by the
commissioner and shall contain the information set forth in this section
as well as any additional information that the commissioner may require.
3. An applicant for a license to perform mold assessment shall meet
the following minimum requirements:
(a) be eighteen years of age or older;
(b) have satisfactorily completed [department] COMMISSIONER approved
course work, including training on the appropriate use and care of
personal protection equipment [as approved by the commissioner of the
department of health]; [and]
(c) paid the appropriate fees as provided in subdivision six of this
section; and
(D) SUBMITTED INSURANCE CERTIFICATES EVIDENCING WORKERS' COMPENSATION
COVERAGE, IF REQUIRED, AND LIABILITY INSURANCE OF AT LEAST FIFTY THOU-
SAND DOLLARS PROVIDING COVERAGE FOR CLAIMS ARISING FROM THE LICENSED
ACTIVITIES AND OPERATIONS PERFORMED PURSUANT TO THIS ARTICLE.
4. An applicant for a license to perform mold remediation shall meet
the following minimum requirements:
(a) be eighteen years of age or older;
(b) have satisfactorily completed [department] COMMISSIONER approved
course work, including training on the appropriate use and care of
personal protection equipment [as approved by the commissioner of the
department of health];
(c) paid the appropriate fees as provided in subdivision six of this
section; and
(d) submitted insurance certificates evidencing workers' compensation
coverage, if required, and liability insurance of at least fifty thou-
sand dollars PROVIDING COVERAGE FOR CLAIMS ARISING FROM THE LICENSED
ACTIVITIES AND OPERATIONS PERFORMED PURSUANT TO THIS ARTICLE. [An
applicant for a license to perform mold remediation shall furnish the
department with a financial statement, prepared by an independent audi-
tor or accountant and signed by the applicant and auditor before a nota-
ry public, stating the assets of the applicant, to be used by the
department to determine the financial responsibility of the applicant to
perform mold remediation services.]
5. An applicant for a license to perform mold abatement shall meet the
following minimum requirements:
(a) be eighteen years of age or older;
(b) have satisfactorily completed [department] COMMISSIONER approved
course work, including training on the appropriate use and care of
personal protection equipment [as approved by the commissioner of the
department of health]; and
(c) paid the appropriate fees as provided in subdivision six of this
section[; and].
6. The [department] COMMISSIONER shall charge and collect the follow-
ing NON-REFUNDABLE fees which shall accompany each application:
S. 3674 4
(a) a fee for an initial application for a license[, not to exceed one
hundred dollars] AS DETERMINED BY THE COMMISSIONER, OF NOT LESS THAN
FIVE HUNDRED DOLLARS NOR MORE THAN ONE THOUSAND DOLLARS FOR A MOLD REME-
DIATION LICENSE, NOT LESS THAN ONE HUNDRED FIFTY DOLLARS NOR MORE THAN
THREE HUNDRED DOLLARS FOR A MOLD ASSESSMENT LICENSE AND NOT LESS THAN
FIFTY DOLLARS NOR MORE THAN ONE HUNDRED DOLLARS FOR AN INDIVIDUAL MOLD
ABATEMENT LICENSE; [and]
(b) a fee for renewal of a license[, not to exceed one hundred
dollars] EQUAL TO THE APPLICATION FEE; AND
(C) A FEE TO BE CHARGED TO A COURSE PROVIDER FOR REVIEW OF EACH COURSE
SUBMITTED FOR APPROVAL, AS DETERMINED BY THE COMMISSIONER, OF NOT LESS
THAN FIVE HUNDRED DOLLARS AND NOT MORE THAN ONE THOUSAND DOLLARS, AND AN
ADDITIONAL FEE TO BE CHARGED TO A COURSE PROVIDER OF NOT LESS THAN ONE
HUNDRED DOLLARS NOR MORE THAN TWO HUNDRED DOLLARS FOR REVIEW OF CHANGES
OF TECHNICAL CONTENT.
S 933. Exemptions. The following persons shall not be required to
obtain a license as provided in this title in order to perform mold
assessment [or], remediation, OR ABATEMENT:
1. a residential property owner who performs mold inspection, assess-
ment [or], remediation, OR ABATEMENT on his or her own property;
2. a non-residential property owner, or the employee of such owner,
who performs mold assessment [or], remediation, OR ABATEMENT on an
apartment building owned by that person that has not more than four
dwelling units; [and]
3. an owner or a managing agent or a full-time employee of an owner OR
MANAGING AGENT who performs mold assessment [or], remediation, OR ABATE-
MENT on commercial property OR A RESIDENTIAL APARTMENT BUILDING OF MORE
THAN FOUR DWELLING UNITS owned by the owner provided, however, that this
subdivision shall not apply if the managing agent or employee engages in
the business of performing mold assessment [or], remediation, OR ABATE-
MENT for the public; AND
4. A FEDERAL, STATE OR LOCAL GOVERNMENTAL UNIT OR PUBLIC AUTHORITY AND
EMPLOYEES THEREOF THAT PERFORM MOLD ASSESSMENT, REMEDIATION, OR ABATE-
MENT ON ANY PROPERTY OWNED, MANAGED OR REMEDIATED BY SUCH GOVERNMENTAL
UNIT OR AUTHORITY.
S 934. License issuance and renewal. 1. Licenses issued pursuant to
the provisions of this title shall be valid for a period of two years
from the date of issuance and may be renewed in accordance with the
conditions set forth in this article and established by the commission-
er.
2. Within thirty days of the receipt of the application and fee for
any license issued under this section, the commissioner shall either
issue the license or [deny the license setting forth the reason for such
denial in writing] ISSUE A NOTIFICATION OF DENIAL PURSUANT TO SUBDIVI-
SION ONE OF SECTION NINE HUNDRED THIRTY-EIGHT OF THIS TITLE.
3. Licenses shall be in a form prescribed by the [department] COMMIS-
SIONER.
4. The renewal of all licenses granted under the provisions of this
article shall be conditioned upon the submission of a certificate of
completion of a [department-approved] COMMISSIONER-APPROVED course
designed to ensure the continuing education of licensees on new and
existing mold assessment and mold remediation standards.
S 935. Practice by license holder. 1. A mold assessment license holder
who intends to perform mold assessment on a mold remediation project
shall prepare a work analysis for the project. The mold assessment
license holder shall provide the analysis to the client before the mold
S. 3674 5
remediation begins and such plan must include the analysis as defined in
section nine hundred forty-five of this article.
2. A mold remediation license holder who intends to perform mold reme-
diation shall prepare a work plan providing instructions for the remedi-
ation efforts to be performed for the mold remediation project. The mold
remediation license holder shall provide the work plan to the client
before the mold remediation begins. The mold remediation license holder
shall maintain a copy of the work plan at the job site where the remedi-
ation is being performed.
S 936. Licensee duties; prohibited activities. 1. A mold assessment
licensee who performs mold assessment services shall provide a written
report to each person for whom such licensee performs mold assessment
services for compensation.
2. No licensee shall perform both mold assessment and mold remediation
on the same property.
3. No person shall own an interest in both the [entity which] LICENSEE
WHO performs mold assessment services and the [entity which] LICENSEE
WHO performs mold remediation services on the same property.
S 937. Civil penalties and revocation. 1. The [department] COMMISSION-
ER may, after a notice and hearing, suspend or revoke any license, or
censure, fine, or impose probationary or other restrictions on any
licensee for good cause shown which shall include, but not be limited to
the following:
(a) conviction of a felony relating to the performance of a mold
assessment or mold remediation;
(b) deceit or misrepresentation in obtaining a license authorized
under this article;
(c) providing false testimony or documents to the [department] COMMIS-
SIONER in relation to a license authorized by this article or any other
license issued by the [department] COMMISSIONER;
(d) deceiving or defrauding the public in relation to services
provided for a fee that require a license; or
(e) incompetence or gross negligence in relation to mold assessment or
mold remediation.
2. Violators of any of the provisions of this article may be fined by
the [department] COMMISSIONER in an amount not to exceed two thousand
dollars for the initial violation and up to ten thousand dollars for
each subsequent violation.
S 938. Denial of license; complaints; notice of hearing. 1. The
[department] COMMISSIONER shall, before making a determination to deny
an application for a license, notify the applicant in writing of the
reasons for such proposed denial and afford the applicant an opportunity
to be heard in person or by counsel prior to denial of the application.
[Such notification shall be served in any manner authorized by the civil
practice law and rules for service of summons.] Such notice shall notify
the applicant that a request for a hearing must be made within thirty
days after [receipt] ISSUANCE of such notification. If a hearing is
requested, such hearing shall be held at such time and place as the
[department] COMMISSIONER shall prescribe.
2. If the applicant fails to make a written request for a hearing
within thirty days after [receipt] ISSUANCE of such notification, then
the notification of denial shall become the final determination of the
[department] COMMISSIONER. The [department] COMMISSIONER shall have
subpoena powers regulated by the civil practice law and rules. If, after
such hearing, the application is denied, written notice of such denial
S. 3674 6
shall be served upon the applicant [in any manner authorized by the
civil practice law and rules for the service of a summons].
3. The [department] COMMISSIONER shall, before revoking or suspending
any license or imposing any fine as authorized by this article or repri-
mand on the holder thereof[, or before issuing any order directing the
cessation of unlicensed activities,] and at least ten days prior to the
date set for the hearing, notify in writing the holder of such license,
[or the person alleged to have engaged in unlicensed activities,] of any
charges made and shall afford such person an opportunity to be heard in
person or by counsel in reference thereto. NO PRIOR NOTICE AND HEARING
IS REQUIRED BEFORE THE COMMISSIONER ISSUES AN ORDER DIRECTING THE CESSA-
TION OF UNLICENSED ACTIVITIES.
4. Written notice must be served to the licensee or person charged.
5. The hearing on such charges shall be at such time and place as the
[department] COMMISSIONER shall prescribe.
S 939. Judicial review. The action of the commissioner in suspending,
revoking or refusing to issue or renew a license, or issuing an order
directing the cessation of unlicensed activity or imposing a fine or
reprimand may be appealed by a proceeding brought under and pursuant to
article seventy-eight of the civil practice law and rules.
S 940. Rulemaking authority. The [department shall] COMMISSIONER MAY
adopt rules and regulations to oversee the practice of mold assessment,
remediation and abatement and to ensure the health, safety and welfare
of the public.
TITLE 2
MINIMUM WORK STANDARDS FOR THE CONDUCT OF
MOLD ASSESSMENTS AND REMEDIATION BY LICENSED PERSONS
Section 945. Minimum work standards for the conduct of mold assessments
by licensed persons.
946. Minimum work standards for the conduct of mold remediation
by licensed persons.
947. Post-remediation assessment and clearance.
948. Investigations and complaints.
S 945. Minimum work standards for the conduct of mold assessments by
licensed persons. 1. A mold assessment licensee shall prepare a mold
remediation plan that is specific to each remediation project and
provide the plan to the client before the remediation begins. The mold
remediation plan must specify:
(a) the rooms or areas where the work will be performed;
(b) the estimated quantities of materials to be cleaned or removed;
(c) the methods to be used for each type of remediation in each type
of area;
(d) the personal protection equipment (PPE) to be supplied by licensed
remediators for use by licensed abaters;
(e) the proposed clearance procedures and criteria for each type of
remediation in each type of area;
(f) when the project is a building that is currently occupied, how to
properly notify such occupants of such projects taking into consider-
ation proper health concerns; the plan must also provide recommendations
for notice and posting requirements that are appropriate for the project
size, duration and points of entry;
(g) an estimate of cost and an estimated time frame for completion;
and
(h) when possible, the underlying sources of moisture that may be
causing the mold and a recommendation as to the type of contractor who
would remedy the source of such moisture.
S. 3674 7
2. The REMEDIATION PLAN MAY REQUIRE containment [specified in the
remediation plan must], AS APPROPRIATE, TO prevent the spread of mold to
areas of the building outside the containment under normal conditions of
use.
3. A mold assessment licensee who indicates in a remediation plan that
a disinfectant, biocide, or antimicrobial coating will be used on a mold
remediation project shall indicate a specific product or brand only if
it is registered by the United States Environmental Protection Agency
for the intended use and if the use is consistent with the manufactur-
er's labeling instructions. A decision by a mold assessment licensee to
use such products must take into account the potential for occupant
sensitivities.
S 946. Minimum work standards for the conduct of mold remediation by
licensed persons. 1. A mold remediation licensee shall prepare a mold
remediation work plan that is specific to each project, fulfills all the
requirements of the mold remediation plan developed by the mold assess-
ment licensee as provided to the client and provides specific
instructions and/or standard operating procedures for how a mold remedi-
ation project will be performed. The mold remediation licensee shall
provide the mold remediation work plan to the client before site prepa-
ration work begins.
2. If a mold assessment licensee specifies in the mold remediation
plan that personal protection equipment (PPE) is required for the
project, the mold remediation licensee shall provide the specified PPE
to all employees who engage in remediation activities and who will, or
are anticipated to, disturb or remove mold contamination. The contain-
ment, when constructed as described in the remediation work plan and
under normal conditions of use, must prevent the spread of mold to areas
outside the containment.
3. Signs advising that a mold remediation project is in progress shall
be displayed at all accessible entrances to remediation areas.
4. No person shall remove or dismantle any containment structures or
materials from a project site prior to receipt by the mold remediation
licensee overseeing the project of a notice from a mold assessment
licensee that the project has achieved clearance as described in section
nine hundred forty-seven of this title.
5. Disinfectants, biocides and antimicrobial coatings may be used only
if their use is specified in a mold remediation plan, if they are regis-
tered by the United States Environmental Protection Agency for the
intended use and if the use is consistent with the manufacturer's label-
ing instructions. If a plan specifies the use of such a product but does
not specify the brand or type of product, a mold remediation licensee
may select the brand or type of product to be used. A decision by a mold
assessment or remediation licensee to use such a product must take into
account the potential for occupant sensitivities and possible adverse
reactions to chemicals that have the potential to be off-gassed from
surfaces coated with the product.
S 947. Post-remediation assessment and clearance. 1. For a remediated
project to achieve clearance, a mold assessment licensee shall conduct a
post-remediation assessment. The post-remediation assessment shall
determine whether:
(a) the work area is free from all visible mold; and
(b) all work has been completed in compliance with the remediation
plan and remediation work plan and meets clearance criteria specified in
the plan.
S. 3674 8
2. Post-remediation assessment shall, to the extent feasible, deter-
mine that the underlying cause of the mold has been remediated so that
it is reasonably certain that the mold will not return from that remedi-
ated area. If it has been determined that the underlying cause of the
mold has not been remediated, the mold assessment licensee shall make a
recommendation to the client as to the type of contractor who could
remedy the source of the mold or the moisture causing the mold.
3. A mold assessment licensee who determines that remediation has been
successful shall issue a written passed clearance report to the client
at the conclusion of each mold remediation project.
4. If the mold assessment licensee determines that remediation has not
been successful, the licensee shall issue a written final status report
to the client and to the remediation licensee and recommend to the
client that either a new assessment be conducted, that the remediation
plan as originally developed be completed, or the underlying causes of
mold be addressed, as appropriate.
S 948. Investigations and complaints. The commissioner shall have the
authority to inspect ongoing or completed mold assessment and mold reme-
diation projects and to conduct an investigation upon his or her own
initiation or upon receipt of a complaint by any person or entity.
S 2. Section 97-pppp of the state finance law, as added by chapter 551
of the laws of 2014, is REPEALED.
S 3. The opening paragraph of subdivision 3 of section 30 of the labor
law, as added by chapter 162 of the laws of 1993, is amended to read as
follows:
Except for variations concerning provisions, rules, codes, orders or
any other matter affecting asbestos projects, MOLD PROJECTS or safety
and health standards for public employees, including but not limited to
projects covered by article thirty and section twenty-seven-a and subdi-
vision ten of section two hundred forty-one of this chapter;
S 4. Section 3 of chapter 551 of the laws of 2014 amending the labor
law relating to requiring the licensure of mold assessment and remedi-
ation specialists and setting minimum work standards for mold assessment
and remediation specialists, is amended to read as follows:
S 3. This act shall take effect on the one hundred eightieth day after
it shall have become a law, PROVIDED, HOWEVER, THAT THE LICENSING
REQUIREMENTS OF SECTION 931 OF ARTICLE 32 OF THE LABOR LAW, AS ADDED BY
SECTION ONE OF THIS ACT, SHALL TAKE EFFECT ON THE FIRST OF JANUARY NEXT
SUCCEEDING THE DATE ON WHICH IT SHALL HAVE BECOME A LAW.
S 5. This act shall take effect immediately; provided, that sections
one, two and three of this act shall take effect on the same date and in
the same manner as chapter 551 of the laws of 2014, takes effect.
